Premium Plus support added

Datasheet.Designer.cs

@@ -30,6 +30,8 @@
         {
             System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(Datasheet));
             this.groupBox1 = new System.Windows.Forms.GroupBox();
+            this.labelBattery = new System.Windows.Forms.Label();
+            this.label6 = new System.Windows.Forms.Label();
             this.buttonPoll = new System.Windows.Forms.Button();
             this.buttonSetID = new System.Windows.Forms.Button();
             this.labelFirmware = new System.Windows.Forms.Label();
@@ -42,17 +44,15 @@
             this.labelCleaning = new System.Windows.Forms.Label();
             this.buttonCleaning = new System.Windows.Forms.Button();
             this.label7 = new System.Windows.Forms.Label();
-            this.label6 = new System.Windows.Forms.Label();
+            this.labelAlarm = new System.Windows.Forms.Label();
             this.label5 = new System.Windows.Forms.Label();
             this.button2 = new System.Windows.Forms.Button();
             this.buttonAlarm = new System.Windows.Forms.Button();
             this.buttonValve = new System.Windows.Forms.Button();
             this.labelValve = new System.Windows.Forms.Label();
             this.label4 = new System.Windows.Forms.Label();
-            this.flowLayoutPanel1 = new System.Windows.Forms.FlowLayoutPanel();
+            this.sensorPanel = new System.Windows.Forms.FlowLayoutPanel();
             this.label9 = new System.Windows.Forms.Label();
-            this.label10 = new System.Windows.Forms.Label();
-            this.flowLayoutPanel2 = new System.Windows.Forms.FlowLayoutPanel();
             this.groupBox1.SuspendLayout();
             ((System.ComponentModel.ISupportInitialize)(this.nudModbusID)).BeginInit();
             this.groupBox2.SuspendLayout();
@@ -60,6 +60,8 @@
             // 
             // groupBox1
             // 
+            this.groupBox1.Controls.Add(this.labelBattery);
+            this.groupBox1.Controls.Add(this.label6);
             this.groupBox1.Controls.Add(this.buttonPoll);
             this.groupBox1.Controls.Add(this.buttonSetID);
             this.groupBox1.Controls.Add(this.labelFirmware);
@@ -68,17 +70,35 @@
             this.groupBox1.Controls.Add(this.label3);
             this.groupBox1.Controls.Add(this.label2);
             this.groupBox1.Controls.Add(this.label1);
-            this.groupBox1.Location = new System.Drawing.Point(369, 12);
+            this.groupBox1.Location = new System.Drawing.Point(304, 12);
             this.groupBox1.Name = "groupBox1";
-            this.groupBox1.Size = new System.Drawing.Size(211, 101);
+            this.groupBox1.Size = new System.Drawing.Size(221, 101);
             this.groupBox1.TabIndex = 0;
             this.groupBox1.TabStop = false;
             this.groupBox1.Text = "Инфо";
             // 
+            // labelBattery
+            // 
+            this.labelBattery.AutoSize = true;
+            this.labelBattery.Location = new System.Drawing.Point(59, 48);
+            this.labelBattery.Name = "labelBattery";
+            this.labelBattery.Size = new System.Drawing.Size(15, 13);
+            this.labelBattery.TabIndex = 9;
+            this.labelBattery.Text = "%";
+            // 
+            // label6
+            // 
+            this.label6.AutoSize = true;
+            this.label6.Location = new System.Drawing.Point(6, 48);
+            this.label6.Name = "label6";
+            this.label6.Size = new System.Drawing.Size(52, 13);
+            this.label6.TabIndex = 8;
+            this.label6.Text = "Батарея:";
+            // 
             // buttonPoll
             // 
             this.buttonPoll.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
-            this.buttonPoll.Location = new System.Drawing.Point(130, 19);
+            this.buttonPoll.Location = new System.Drawing.Point(140, 43);
             this.buttonPoll.Name = "buttonPoll";
             this.buttonPoll.Size = new System.Drawing.Size(75, 23);
             this.buttonPoll.TabIndex = 7;
@@ -88,7 +108,7 @@
             // 
             // buttonSetID
             // 
-            this.buttonSetID.Location = new System.Drawing.Point(130, 55);
+            this.buttonSetID.Location = new System.Drawing.Point(140, 68);
             this.buttonSetID.Name = "buttonSetID";
             this.buttonSetID.Size = new System.Drawing.Size(75, 23);
             this.buttonSetID.TabIndex = 6;
@@ -110,13 +130,13 @@
             this.labelModel.AutoSize = true;
             this.labelModel.Location = new System.Drawing.Point(61, 16);
             this.labelModel.Name = "labelModel";
-            this.labelModel.Size = new System.Drawing.Size(50, 13);
+            this.labelModel.Size = new System.Drawing.Size(46, 13);
             this.labelModel.TabIndex = 4;
-            this.labelModel.Text = "Standard";
+            this.labelModel.Text = "Модель";
             // 
             // nudModbusID
             // 
-            this.nudModbusID.Location = new System.Drawing.Point(74, 58);
+            this.nudModbusID.Location = new System.Drawing.Point(74, 71);
             this.nudModbusID.Name = "nudModbusID";
             this.nudModbusID.Size = new System.Drawing.Size(50, 20);
             this.nudModbusID.TabIndex = 3;
@@ -124,7 +144,7 @@
             // label3
             // 
             this.label3.AutoSize = true;
-            this.label3.Location = new System.Drawing.Point(6, 60);
+            this.label3.Location = new System.Drawing.Point(6, 73);
             this.label3.Name = "label3";
             this.label3.Size = new System.Drawing.Size(62, 13);
             this.label3.TabIndex = 2;
@@ -153,7 +173,7 @@
             this.groupBox2.Controls.Add(this.labelCleaning);
             this.groupBox2.Controls.Add(this.buttonCleaning);
             this.groupBox2.Controls.Add(this.label7);
-            this.groupBox2.Controls.Add(this.label6);
+            this.groupBox2.Controls.Add(this.labelAlarm);
             this.groupBox2.Controls.Add(this.label5);
             this.groupBox2.Controls.Add(this.button2);
             this.groupBox2.Controls.Add(this.buttonAlarm);
@@ -162,7 +182,7 @@
             this.groupBox2.Controls.Add(this.label4);
             this.groupBox2.Location = new System.Drawing.Point(13, 12);
             this.groupBox2.Name = "groupBox2";
-            this.groupBox2.Size = new System.Drawing.Size(350, 100);
+            this.groupBox2.Size = new System.Drawing.Size(285, 100);
             this.groupBox2.TabIndex = 1;
             this.groupBox2.TabStop = false;
             this.groupBox2.Text = "Общее";
@@ -170,7 +190,7 @@
             // labelCleaning
             // 
             this.labelCleaning.AutoSize = true;
-            this.labelCleaning.Location = new System.Drawing.Point(52, 78);
+            this.labelCleaning.Location = new System.Drawing.Point(52, 77);
             this.labelCleaning.Name = "labelCleaning";
             this.labelCleaning.Size = new System.Drawing.Size(33, 13);
             this.labelCleaning.TabIndex = 9;
@@ -178,7 +198,7 @@
             // 
             // buttonCleaning
             // 
-            this.buttonCleaning.Location = new System.Drawing.Point(192, 73);
+            this.buttonCleaning.Location = new System.Drawing.Point(125, 72);
             this.buttonCleaning.Name = "buttonCleaning";
             this.buttonCleaning.Size = new System.Drawing.Size(73, 23);
             this.buttonCleaning.TabIndex = 8;
@@ -189,20 +209,20 @@
             // label7
             // 
             this.label7.AutoSize = true;
-            this.label7.Location = new System.Drawing.Point(6, 78);
+            this.label7.Location = new System.Drawing.Point(6, 77);
             this.label7.Name = "label7";
             this.label7.Size = new System.Drawing.Size(48, 13);
             this.label7.TabIndex = 7;
             this.label7.Text = "Уборка:";
             // 
-            // label6
+            // labelAlarm
             // 
-            this.label6.AutoSize = true;
+            this.labelAlarm.AutoSize = true;
-            this.label6.Location = new System.Drawing.Point(61, 48);
+            this.labelAlarm.Location = new System.Drawing.Point(61, 48);
-            this.label6.Name = "label6";
+            this.labelAlarm.Name = "labelAlarm";
-            this.label6.Size = new System.Drawing.Size(24, 13);
+            this.labelAlarm.Size = new System.Drawing.Size(24, 13);
-            this.label6.TabIndex = 6;
+            this.labelAlarm.TabIndex = 6;
-            this.label6.Text = "нет";
+            this.labelAlarm.Text = "нет";
             // 
             // label5
             // 
@@ -215,7 +235,7 @@
             // 
             // button2
             // 
-            this.button2.Location = new System.Drawing.Point(271, 14);
+            this.button2.Location = new System.Drawing.Point(204, 14);
             this.button2.Name = "button2";
             this.button2.Size = new System.Drawing.Size(73, 52);
             this.button2.TabIndex = 4;
@@ -224,7 +244,7 @@
             // 
             // buttonAlarm
             // 
-            this.buttonAlarm.Location = new System.Drawing.Point(192, 43);
+            this.buttonAlarm.Location = new System.Drawing.Point(125, 43);
             this.buttonAlarm.Name = "buttonAlarm";
             this.buttonAlarm.Size = new System.Drawing.Size(73, 23);
             this.buttonAlarm.TabIndex = 3;
@@ -234,7 +254,7 @@
             // 
             // buttonValve
             // 
-            this.buttonValve.Location = new System.Drawing.Point(192, 14);
+            this.buttonValve.Location = new System.Drawing.Point(125, 14);
             this.buttonValve.Name = "buttonValve";
             this.buttonValve.Size = new System.Drawing.Size(73, 23);
             this.buttonValve.TabIndex = 2;
@@ -260,58 +280,41 @@
             this.label4.TabIndex = 0;
             this.label4.Text = "Кран:";
             // 
-            // flowLayoutPanel1
+            // sensorPanel
             // 
-            this.flowLayoutPanel1.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom) 
+            this.sensorPanel.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom) 
             | System.Windows.Forms.AnchorStyles.Left)));
-            this.flowLayoutPanel1.FlowDirection = System.Windows.Forms.FlowDirection.TopDown;
+            this.sensorPanel.AutoScroll = true;
-            this.flowLayoutPanel1.Location = new System.Drawing.Point(13, 135);
+            this.sensorPanel.BackColor = System.Drawing.Color.Gainsboro;
-            this.flowLayoutPanel1.Name = "flowLayoutPanel1";
+            this.sensorPanel.FlowDirection = System.Windows.Forms.FlowDirection.TopDown;
-            this.flowLayoutPanel1.Size = new System.Drawing.Size(280, 175);
+            this.sensorPanel.Location = new System.Drawing.Point(13, 135);
-            this.flowLayoutPanel1.TabIndex = 4;
+            this.sensorPanel.Name = "sensorPanel";
+            this.sensorPanel.Size = new System.Drawing.Size(512, 175);
+            this.sensorPanel.TabIndex = 4;
+            this.sensorPanel.WrapContents = false;
             // 
             // label9
             // 
             this.label9.AutoSize = true;
             this.label9.Location = new System.Drawing.Point(10, 119);
             this.label9.Name = "label9";
-            this.label9.Size = new System.Drawing.Size(108, 13);
+            this.label9.Size = new System.Drawing.Size(50, 13);
             this.label9.TabIndex = 5;
-            this.label9.Text = "Проводные датчики";
+            this.label9.Text = "Датчики";
-            // 
-            // label10
-            // 
-            this.label10.AutoSize = true;
-            this.label10.Location = new System.Drawing.Point(297, 119);
-            this.label10.Name = "label10";
-            this.label10.Size = new System.Drawing.Size(78, 13);
-            this.label10.TabIndex = 7;
-            this.label10.Text = "Радиодатчики";
-            // 
-            // flowLayoutPanel2
-            // 
-            this.flowLayoutPanel2.Anchor = ((System.Windows.Forms.AnchorStyles)(((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Bottom) 
-            | System.Windows.Forms.AnchorStyles.Left)));
-            this.flowLayoutPanel2.FlowDirection = System.Windows.Forms.FlowDirection.TopDown;
-            this.flowLayoutPanel2.Location = new System.Drawing.Point(300, 135);
-            this.flowLayoutPanel2.Name = "flowLayoutPanel2";
-            this.flowLayoutPanel2.Size = new System.Drawing.Size(280, 175);
-            this.flowLayoutPanel2.TabIndex = 6;
             // 
             // Datasheet
             // 
             this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
             this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
-            this.ClientSize = new System.Drawing.Size(592, 322);
+            this.ClientSize = new System.Drawing.Size(537, 322);
-            this.Controls.Add(this.label10);
-            this.Controls.Add(this.flowLayoutPanel2);
             this.Controls.Add(this.label9);
-            this.Controls.Add(this.flowLayoutPanel1);
+            this.Controls.Add(this.sensorPanel);
             this.Controls.Add(this.groupBox2);
             this.Controls.Add(this.groupBox1);
             this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
             this.MaximizeBox = false;
             this.Name = "Datasheet";
+            this.SizeGripStyle = System.Windows.Forms.SizeGripStyle.Hide;
             this.Text = "Datasheet";
             this.groupBox1.ResumeLayout(false);
             this.groupBox1.PerformLayout();
@@ -344,10 +347,10 @@
         private System.Windows.Forms.Label labelCleaning;
         private System.Windows.Forms.Button buttonCleaning;
         private System.Windows.Forms.Label label7;
-        private System.Windows.Forms.Label label6;
+        private System.Windows.Forms.Label labelAlarm;
-        private System.Windows.Forms.FlowLayoutPanel flowLayoutPanel1;
+        private System.Windows.Forms.FlowLayoutPanel sensorPanel;
         private System.Windows.Forms.Label label9;
-        private System.Windows.Forms.Label label10;
+        private System.Windows.Forms.Label label6;
-        private System.Windows.Forms.FlowLayoutPanel flowLayoutPanel2;
+        private System.Windows.Forms.Label labelBattery;
     }
 }

Datasheet.cs

@@ -1,28 +1,21 @@
-using System;
+using Newtonsoft.Json.Linq;
+using System;
+using System.Collections;
 using System.Collections.Generic;
 using System.Drawing;
 using System.IO.Ports;
 using System.Linq;
-using System.Threading;
 using System.Threading.Tasks;
 using System.Windows.Forms;
-using System.Xml;
-
 
 namespace Gidrolock_Modbus_Scanner
 {
-    /*
-     * This is more of a View than a View-Controller
-     * Relegate everything to interface functions for models
-     */
     public partial class Datasheet : Form
     {
         byte modbusID;
         Device device;
 
-        byte[] message;
+        ModbusResponseEventArgs latestMessage;
-        byte[] data;
-        EventHandler<ModbusResponseEventArgs> handler;
 
         SerialPort port = Modbus.port;
         bool isPolling = false;
@@ -33,86 +26,378 @@ namespace Gidrolock_Modbus_Scanner
         bool alarmStatus = false;
         bool cleaningStatus = false;
 
-        public Datasheet(byte modbusID, Device device)
+        List<WiredSensor> wiredSensors = new List<WiredSensor>();
+        List<WirelessSensor> wirelessSensors;
+        
+
+
+        public Datasheet(byte modbusID, Device device) : base()
         {
+            InitializeComponent();
+
             nudModbusID.Minimum = 1;
             nudModbusID.Maximum = 246;
+            nudModbusID.Value = modbusID;
             this.modbusID = modbusID;
             this.device = device;
 
+            labelModel.Text = device.name;
+            labelFirmware.Text = "v???";
+
             if (!device.hasCleaningMode)
             {
                 labelCleaning.Text = "Недоступна.";
                 buttonCleaning.Enabled = false;
             }
+            if (!device.hasBattery)
+                labelBattery.Text = "Нет";
+            else labelBattery.Text = "???%";
 
-            handler = (sndr, msg) =>
+            Modbus.ResponseReceived += (sndr, msg) => { isAwaitingResponse = false; latestMessage = msg; };
+
+            for (int i = 0; i < device.wiredSensors; i++)
             {
-                message = msg.Message;
+                WiredSensor ws = new WiredSensor(i) { Width = 495, Height = 24 };
-                data = msg.Data;
+                sensorPanel.Controls.Add(ws);
-            };
+                ws.Visible = true;
                 
             }
+            if (device.hasScenarioSensor)
+            {
+                ScenarioSensor scenSen = new ScenarioSensor() { Width = 495, Height = 24 };
+                sensorPanel.Controls.Add(scenSen);
+                scenSen.Visible = true;
+            }
+            if (device.wiredSensors < device.sensorsAlarm.length)
+            {
+                wirelessSensors = new List<WirelessSensor>();
+                int wsrIndex = device.sensorsAlarm.length - device.wiredSensors - (device.hasScenarioSensor ? 1 : 0);
+                for (int i = 0; i < wsrIndex; i++)
+                {
+                    WirelessSensor wsr = new WirelessSensor(i) { Width = 495, Height = 24 };
+                    sensorPanel.Controls.Add(wsr);
+                    wsr.Visible = true;
+                }
+            }
+
+            for (int i = 0; i < sensorPanel.Controls.Count; i++)
+                sensorPanel.Controls[i].BackColor = i % 2 == 0 ? Color.White : Color.LightGray;
+
+
+            sensorPanel.Update();
+        }
 
         private async void buttonPoll_Click(object sender, EventArgs e)
         {
             // hardcoded for now, probably easier to keep it like this in the future
-            if (await PollEntry(device.valveStatus))
+            try
             {
-                if (data.Last() > 0)
+                bool res = await PollEntry(device.valveStatus); // for some reason main thread doesn't go
+                Console.WriteLine("Polling for valve status, poll success: " + res);
+                if (res)
+                {
+                    if (latestMessage.Data.Last() > 0)
+                    {
+                        isValveClosed = true;
                         labelValve.Text = "Закрыт";
-                else labelValve.Text = "Открыт";
+                        buttonValve.Text = "Открыть";
                     }
+                    else
+                    {
+                        isValveClosed = false;
+                        labelValve.Text = "Открыт";
+                        buttonValve.Text = "Закрыть";
+                    }
+                }
+
+                res = await PollEntry(device.alarmStatus);
+                Console.WriteLine("Polling for alarm status, poll success: " + res);
+                if (res)
+                {
+                    if (latestMessage.Data.Last() > 0)
+                    {
+                        alarmStatus = true;
+                        buttonAlarm.Text = "Выключить";
+                        labelAlarm.Text = "Протечка!";
+                    }
+                    else
+                    {
+                        alarmStatus = false;
+                        buttonAlarm.Text = "Авария";
+                        labelAlarm.Text = "нет";
+                    }
+                }
+
+                if (device.hasCleaningMode)
+                {
+                    res = await PollEntry(device.cleaningMode);
+                    if (res)
+                    {
+                        if (latestMessage.Data.Last() > 0)
+                        {
+                            cleaningStatus = true;
+                            buttonAlarm.Text = "Выключить";
+                            labelAlarm.Text = "вкл";
+                        }
+                        else
+                        {
+                            cleaningStatus = false;
+                            buttonAlarm.Text = "Включить";
+                            labelAlarm.Text = "выкл";
+                        }
+                    }
+                }
+
+                if (device.hasBattery)
+                {
+                    res = await PollEntry(device.batteryCharge);
+                    if (res)
+                    {
+                        labelBattery.Text = latestMessage.Data.Last().ToString();
+                    }
+                }
+                if (device.hasCleaningMode)
+                {
+                    res = await PollEntry(device.cleaningMode);
+                    if (res)
+                    {
+                        if (latestMessage.Data.Last() > 0)
+                        {
+                            cleaningStatus = true;
+                            buttonAlarm.Text = "Выключить";
+                            labelAlarm.Text = "вкл";
+                        }
+                        else
+                        {
+                            cleaningStatus = false;
+                            buttonAlarm.Text = "Включить";
+                            labelAlarm.Text = "выкл";
+                        }
+                    }
+                }
+
+                res = await PollEntry(device.sensorsAlarm);
+                if (res)
+                {
+                    BitArray bArray = new BitArray(latestMessage.Data);
+                    bool[] bools = new bool[bArray.Length];
+                    bArray.CopyTo(bools, 0);
+                    for (int i = 0; i < device.sensorsAlarm.length; i++)
+                    {
+                        Sensor snsr = sensorPanel.Controls[i] as Sensor;
+                        snsr.labelLeak.Text = bools[i] ? "Протечка!" : "нет";
+                    }
+                }
+            }
+            catch (Exception err) { MessageBox.Show(err.Message); }
         }
 
         async Task<bool> PollEntry(Entry entry)
         {
-            var send = Modbus.ReadRegAsync(modbusID, (FunctionCode)entry.registerType, entry.address, entry.length);
+            bool res = false;
+            Modbus.ReadRegAsync(modbusID, (FunctionCode)entry.registerType, entry.address, entry.length);
             isAwaitingResponse = true;
-
+            await Task.Delay(2000).ContinueWith(_ =>
-            Task<bool> delay = Task.WhenAny(Task.Delay(2000), Task.Run(() => { while (isAwaitingResponse) { } return true; })).ContinueWith((t) =>
             {
                 if (isAwaitingResponse)
                 {
-                    Console.WriteLine("Response timed out.");
+                    MessageBox.Show("Превышено время ожидания ответа от устройства.");
+                    isAwaitingResponse = false;
+                }
+            });
+            while (isAwaitingResponse) { continue; }
+
+            if (latestMessage != null && latestMessage.Status != ModbusStatus.Error)
+                res = true;
+
+            Console.WriteLine("Poll attempt finished");
+            return res;
+        }
+
+        private async void buttonSetID_Click(object sender, EventArgs e)
+        {
+            byte newID = (byte)nudModbusID.Value; // should prevent assigning wrong ID if UpDown is fiddled with in the middle of request 
+            Modbus.WriteSingleAsync(FunctionCode.WriteRegister, modbusID, 128, newID);
+            await Task.Delay(2000).ContinueWith(_ =>
+            {
+                if (isAwaitingResponse)
+                {
+                    MessageBox.Show("Превышено время ожидания ответа от устройства.");
                     isAwaitingResponse = false;
                 }
                 return false;
             });
+            while (isAwaitingResponse) { continue; }
 
-            return await delay;
+            if (latestMessage != null && latestMessage.Status != ModbusStatus.Error)
+                modbusID = newID;
         }
-        private async void buttonSetID_Click(object sender, EventArgs e)
-        {
-            Modbus.WriteSingleAsync(FunctionCode.WriteRegister, modbusID, 200, (byte)nudModbusID.Value);
 
-            await Task.Run(() =>
+        private async void buttonValve_Click(object sender, EventArgs e)
         {
-                while (data is null) { continue; }
+            ushort value = isValveClosed ? (ushort)0: (ushort)0xFF00;
-                if (message[1] > 0x10)  //exception code check
+            Modbus.WriteSingleAsync(FunctionCode.WriteCoil, modbusID, device.valveStatus.address, value);
-                    return;
+
-                this.modbusID = data[1]; //no exception, can just take the byte
+            await Task.Delay(2000).ContinueWith(_ =>
-                message = null;
+            {
-                data = null;
+                if (isAwaitingResponse)
+                {
+                    MessageBox.Show("Превышено время ожидания ответа от устройства.");
+                    isAwaitingResponse = false;
+                }
+                return false;
             });
+            while (isAwaitingResponse) { continue; }
 
+            if (latestMessage != null && latestMessage.Status != ModbusStatus.Error)
+            {
+                isValveClosed = !isValveClosed;
+                labelValve.Text = isValveClosed ? "Закрыт" : "Открыт";
+                buttonValve.Text = isValveClosed ? "Открыть" : "Закрыть";
+            }
         }
 
-        private void buttonValve_Click(object sender, EventArgs e)
+        private async void buttonAlarm_Click(object sender, EventArgs e)
         {
-            ushort value = isValveClosed ? (ushort)0 : (ushort)1;
+            ushort value = alarmStatus ? (ushort)0 : (ushort)0xFF00;
-            Modbus.WriteSingleAsync((FunctionCode)device.valveStatus.registerType, modbusID, device.valveStatus.address, value);
+            Modbus.WriteSingleAsync(FunctionCode.WriteCoil, modbusID, device.alarmStatus.address, value);
+
+            await Task.Delay(2000).ContinueWith(_ =>
+            {
+                if (isAwaitingResponse)
+                {
+                    MessageBox.Show("Превышено время ожидания ответа от устройства.");
+                    isAwaitingResponse = false;
+                }
+                return false;
+            });
+            while (isAwaitingResponse) { continue; }
+
+            if (latestMessage != null && latestMessage.Status != ModbusStatus.Error)
+            {
+                alarmStatus = !alarmStatus;
+                labelAlarm.Text = alarmStatus ? "Протечка!" : "Нет";
+                buttonAlarm.Text = alarmStatus ? "Выключить" : "Авария";
+            }
         }
 
-        private void buttonAlarm_Click(object sender, EventArgs e)
+        private async void buttonCleaning_Click(object sender, EventArgs e)
         {
-            ushort value = alarmStatus ? (ushort)0 : (ushort)1;
+            ushort value = cleaningStatus ? (ushort)0 : (ushort)0xFF00;
-            Modbus.WriteSingleAsync((FunctionCode)device.valveStatus.registerType, modbusID, device.alarmStatus.address, value);
+            Modbus.WriteSingleAsync(FunctionCode.WriteCoil, modbusID, device.cleaningMode.address, value);
+
+            await Task.Delay(2000).ContinueWith(_ =>
+            {
+                if (isAwaitingResponse)
+                {
+                    MessageBox.Show("Превышено время ожидания ответа от устройства.");
+                    isAwaitingResponse = false;
+                }
+                return false;
+            });
+            while (isAwaitingResponse) { continue; }
+
+            if (latestMessage != null && latestMessage.Status != ModbusStatus.Error)
+            {
+                cleaningStatus = !cleaningStatus;
+                labelCleaning.Text = cleaningStatus ? "вкл" : "выкл";
+                buttonCleaning.Text = cleaningStatus ? "Выключить" : "Включить";
+            }
+        }
+    }
+    public class Sensor : FlowLayoutPanel
+    {
+        public Label labelName = new Label() { Width = 60, Height = 24 };
+        public Label labelLeakFluff = new Label() { Width = 60, Height = 24 };
+        public Label labelLeak = new Label() { Width = 50, Height = 24 };
+    }
+    public class WiredSensor : Sensor
+    {
+
+        public Label labelBreakFluff = new Label() { Width = 45, Height = 24 };
+        public Label labelBreak = new Label() { Width = 55, Height = 24 }; // обрыв линии для WSP+
+
+        public Label labelWSPPlusFluff = new Label() { Width = 45, Height = 24 };
+        public CheckBox wspPlusCheckbox = new CheckBox() { Width = 20, Height = 20 };
+        public WiredSensor(int count)
+        {
+            this.Margin = Padding.Empty;
+            this.Padding = new Padding(0, 5, 0, 0);
+            this.WrapContents = false;
+            this.BackColor = Color.White;
+            this.Height = 15;
+            this.FlowDirection = FlowDirection.LeftToRight;
+            this.Controls.Add(labelName);
+
+            this.Controls.Add(labelBreakFluff);
+            this.Controls.Add(labelBreak);
+
+            this.Controls.Add(labelLeakFluff);
+            this.Controls.Add(labelLeak);
+
+            this.Controls.Add(labelWSPPlusFluff);
+            this.Controls.Add(wspPlusCheckbox);
+
+            labelName.Text = "WSP " + (count + 1);
+
+            labelLeakFluff.Text = "Протечка:";
+            labelLeak.Text = "неизвестно";
+
+            labelBreakFluff.Text = "Обрыв:";
+            labelBreak.Text = "неизвестно";
+
+            labelWSPPlusFluff.Text = "WSP+:";
+        }
     }
 
-        private void buttonCleaning_Click(object sender, EventArgs e)
+    public class WirelessSensor : Sensor
     {
 
+        public Label labelBatteryFluff = new Label() { Width = 55, Height = 24 };
+        public Label labelBattery = new Label() { Width = 45, Height = 24 };
+
+        public WirelessSensor(int count)
+        {
+            this.Margin = Padding.Empty;
+            this.Padding = new Padding(0, 5, 0, 0);
+            this.BackColor = Color.White;
+            this.FlowDirection = FlowDirection.LeftToRight;
+            this.WrapContents = false;
+
+            this.Controls.Add(labelName);
+            this.Controls.Add(labelBatteryFluff);
+            this.Controls.Add(labelBattery);
+            this.Controls.Add(labelLeakFluff);
+            this.Controls.Add(labelLeak);
+
+            labelName.Text = "WSR " + (count + 1);
+
+            labelLeakFluff.Text = "Протечка:";
+            labelLeak.Text = "неизвестно";
+
+            labelBatteryFluff.Text = "Батарея:";
+            labelBattery.Text = "???%";
+        }
+    }
+
+    public class ScenarioSensor : Sensor
+    {
+        public ScenarioSensor()
+        {
+            labelName.Width = 172;
+            this.Margin = Padding.Empty;
+            this.Padding = new Padding(0, 5, 0, 0);
+            this.FlowDirection = FlowDirection.LeftToRight;
+            this.WrapContents = false;
+
+            this.Controls.Add(labelName);
+            this.Controls.Add(labelLeakFluff);
+            this.Controls.Add(labelLeak);
+
+            labelName.Text = "Сценарный датчик";
+
+            labelLeakFluff.Text = "Протечка:";
+            labelLeak.Text = "неизвестно";
         }
     }
 }

Gidrolock Modbus Configurator.csproj

@@ -6,8 +6,8 @@
     <Platform Condition=" '$(Platform)' == '' ">AnyCPU</Platform>
     <ProjectGuid>{47A399D3-30C1-4EF4-9E94-F3518919A59C}</ProjectGuid>
     <OutputType>WinExe</OutputType>
-    <RootNamespace>Gidrolock_Modbus_Scanner</RootNamespace>
+    <RootNamespace>Gidrolock_Modbus_Configurator</RootNamespace>
-    <AssemblyName>Gidrolock Modbus Scanner</AssemblyName>
+    <AssemblyName>Gidrolock Modbus Configurator</AssemblyName>
     <TargetFrameworkVersion>v4.8</TargetFrameworkVersion>
     <FileAlignment>512</FileAlignment>
     <AutoGenerateBindingRedirects>true</AutoGenerateBindingRedirects>
@@ -98,6 +98,7 @@
     <Compile Include="Properties\Resources.Designer.cs">
       <AutoGen>True</AutoGen>
       <DependentUpon>Resources.resx</DependentUpon>
+      <DesignTime>True</DesignTime>
     </Compile>
     <None Include=".gitignore" />
     <None Include="packages.config" />

Main.cs

@@ -16,14 +16,10 @@ namespace Gidrolock_Modbus_Scanner
         public short[] res = new short[12];
         SerialPort port = Modbus.port;
         public int expectedLength = 0;
+        ModbusResponseEventArgs latestMessage;
 
-        public byte[] latestMessage;
         public Dictionary<string, string> models = new Dictionary<string, string>();
 
-        byte[] message = null;
-        byte[] data = null;
-        
-
         DateTime dateTime;
 
         Datasheet datasheet;
@@ -38,9 +34,9 @@ namespace Gidrolock_Modbus_Scanner
             TextBox_Log.Text = "Приложение готово к работе.";
 
             cBoxDevice.Items.Add("Standard");
-            cBoxDevice.Items.Add("Inteli");
             cBoxDevice.Items.Add("Premium Plus");
-            cBoxDevice.Items.Add("Premium");
+            //cBoxDevice.Items.Add("Inteli");
+            //cBoxDevice.Items.Add("Premium");
             cBoxDevice.SelectedIndex = 0;
 
             checkboxID.Checked = false;
@@ -50,8 +46,8 @@ namespace Gidrolock_Modbus_Scanner
             UpDown_ModbusID.Maximum = 247;
 
             models.Add("Standard", "STW485");
+            models.Add("Premium Plus", "PRPLS1");
             models.Add("Inteli", "INTELI");
-            models.Add("Premuim Plus", "BUP485");
             models.Add("Premium", "BUP485");
 
             /* - Version Check - */
@@ -62,8 +58,8 @@ namespace Gidrolock_Modbus_Scanner
 
             Modbus.ResponseReceived += (sndr, msg) =>
             {
-                message = msg.Message;
+                latestMessage = msg;
-                data = msg.Data;
+                isAwaitingResponse = false;
             };
         }
 
@@ -119,18 +115,43 @@ namespace Gidrolock_Modbus_Scanner
                 // else parse response to unicode and go through every .json
                 // if matching model is found, instantiate device window
 
-                // setup event listener
 
-
+                string selectedModel = models[cBoxDevice.SelectedItem.ToString()];
-                // send message
+                int selectedIndex = cBoxDevice.SelectedIndex;
                 AddLog("Проверка модели устройства.");
-
+                await Task.Run(async () =>
-                if (await PollModel())
                 {
-                    Console.WriteLine("true");
+                    // send message
+                    latestMessage = null;
+                    isAwaitingResponse = true;
+                    var send = Modbus.ReadRegAsync((byte)UpDown_ModbusID.Value, FunctionCode.ReadInput, 200, 6);
+                    await Task.Delay(2000).ContinueWith(_ =>
+                    {
+                        if (isAwaitingResponse)
+                        {
+                            isAwaitingResponse = false;
+                            MessageBox.Show("Истекло время ожидания ответа от устройства.");
+                        }
+                        return;
+                    });
+
+                    while (isAwaitingResponse) { continue; }
+
+                    if (latestMessage is null) 
+                    {
+                        Console.WriteLine("latestMessage is still null");
+                        return;
+                    }
+
+                    if (latestMessage.Status == ModbusStatus.Error)
+                        return;
+
+
                     // confirm the model
-                    string response = ByteArrayToUnicode(data);
+                    string response = ByteArrayToUnicode(latestMessage.Data);
-                    if (response != models[cBoxDevice.SelectedItem.ToString()])
+                    Console.WriteLine("device model response: " + response);
+                    Console.WriteLine("expected response: " + selectedModel);
+                    if (response != selectedModel)
                     {
                         // response doesn't match expected model
                         AddLog("Ответ устройства не соответствует выбранной модели. Поиск подходящей модели.");
@@ -169,39 +190,22 @@ namespace Gidrolock_Modbus_Scanner
                     else
                     {
                         // model is correct, instantiate config panel
-                        int index = cBoxDevice.SelectedIndex;
                         AddLog("Устройство соответстует модели, открываю панель конфигурации.");
-                        Device device = GetDevice((DeviceType)index);
+                        Device device = GetDevice((DeviceType)selectedIndex);
                         StartDatasheet(device);
                     }
-                }
+                });
             }
             catch (Exception ex)
             {
                 MessageBox.Show(ex.Message);
             }
         }
-        async Task<bool> PollModel()
-        {
-            var send = Modbus.ReadRegAsync((byte)UpDown_ModbusID.Value, FunctionCode.ReadInput, 200, 6);
-            isAwaitingResponse = true;
 
-            Task<bool> delay = Task.WhenAny(Task.Delay(2000), Task.Run(() => { while (isAwaitingResponse) { } return true; })).ContinueWith((t) =>
-            {
-                if (isAwaitingResponse)
-                {
-                    Console.WriteLine("Response timed out.");
-                    isAwaitingResponse = false;
-                }
-                return false;
-            });
-
-            return await delay;
-        }
         void StartDatasheet(Device device)
         {
             datasheet = new Datasheet((byte)UpDown_ModbusID.Value, device);
-            datasheet.Show();
+            Application.Run(datasheet);
         }
 
 
@@ -296,12 +300,14 @@ namespace Gidrolock_Modbus_Scanner
             // stupid fucking Encoding class does byte-by-byte conversion
             List<char> result = new List<char>(input.Length / 2);
             byte[] flip = input;
-            Array.Reverse(flip); // stupid fucking BitConverter is little-endian and spits out chinese nonsense otherwise
+            //Array.Reverse(flip); // stupid fucking BitConverter is little-endian and spits out chinese nonsense otherwise
-            for (int i = 0; i < flip.Length; i += 2)
+            for (int i = 0; i < flip.Length; i++)
             {
-                result.Add(BitConverter.ToChar(flip, i));
+                if (flip[i] == 0x00)
+                    continue;
+                else result.Add(Convert.ToChar(flip[i]));
             }
-            result.Reverse();
+            //result.Reverse();
             return new string(result.ToArray());
         }
 
@@ -338,8 +344,7 @@ namespace Gidrolock_Modbus_Scanner
             switch (dt)
             {
                 case DeviceType.Standard:
-                    d.modelName = "Standard";
+                    d.name = "Standard Wi-Fi RS485";
-                    d.name = "Gidrolock Standard Wi-Fi RS485";
                     d.id = 30;
                     d.modelName = "STW485";
 
@@ -362,7 +367,22 @@ namespace Gidrolock_Modbus_Scanner
                     d.modelName = "Inteli";
                     break;
                 case DeviceType.PremiumPlus:
-                    d.modelName = "Premium Plus";
+                    d.name = "Premium Plus Wi-Fi";
+                    d.id = 30;
+                    d.modelName = "PRPLS1";
+
+                    d.valveStatus = new Entry(RegisterType.Coil, 1202);
+                    d.alarmStatus = new Entry(RegisterType.Coil, 1201);
+
+                    d.hasCleaningMode = true;
+                    d.cleaningMode = new Entry(RegisterType.Coil, 3);
+
+                    d.hasBattery = true;
+                    d.batteryCharge = new Entry(RegisterType.Input, 1207);
+
+                    d.wiredSensors = 7;
+                    d.hasScenarioSensor = true;
+                    d.sensorsAlarm = new Entry(RegisterType.Discrete, 1343, 29);
                     break;
                 case DeviceType.Premium:
                     d.modelName = "Premium";
@@ -378,4 +398,4 @@ namespace Gidrolock_Modbus_Scanner
 
 public enum FunctionCode { ReadCoil = 1, ReadDiscrete = 2, ReadHolding = 3, ReadInput = 4, WriteCoil = 5, WriteRegister = 6, WriteMultCoils = 15, WriteMultRegisters = 16 };
 //public enum SelectedPath { File, Folder };
-public enum DeviceType { Standard, Inteli, PremiumPlus, Premium };
+public enum DeviceType { Standard, PremiumPlus, Inteli, Premium };

Model.cs

@@ -23,7 +23,7 @@ namespace Gidrolock_Modbus_Scanner
         public bool hasScenarioSensor;
         public Entry sensorsAlarm;
 
-        public Entry wiredLineBreak;
+        public List<Entry> wiredLineBreak;
 
         public Entry radioStatus;
     }

Properties/AssemblyInfo.cs

@@ -6,12 +6,12 @@ using System.Runtime.InteropServices;
 // General Information about an assembly is controlled through the following
 // set of attributes. Change these attribute values to modify the information
 // associated with an assembly.
-[assembly: AssemblyTitle("Gidrolock Modbus Scanner")]
+[assembly: AssemblyTitle("Gidrolock Modbus Configurator")]
-[assembly: AssemblyDescription("A collection of Modbus tools.")]
+[assembly: AssemblyDescription("A diagnosting modbus tool for Gidrolock valve controllers.")]
 [assembly: AssemblyConfiguration("")]
-[assembly: AssemblyCompany("nikzori")]
+[assembly: AssemblyCompany("Gidrolock")]
-[assembly: AssemblyProduct("Gidrolock Modbus Scanner")]
+[assembly: AssemblyProduct("Gidrolock Modbus Configurator")]
-[assembly: AssemblyCopyright("Copyright ©  2024")]
+[assembly: AssemblyCopyright("Copyright ©  2025")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
 

Properties/Resources.Designer.cs

@@ -8,8 +8,8 @@
 // </auto-generated>
 //------------------------------------------------------------------------------
 
-namespace Gidrolock_Modbus_Scanner.Properties
+namespace Gidrolock_Modbus_Configurator.Properties {
-{
+    using System;
     
     
     /// <summary>
@@ -19,32 +19,27 @@ namespace Gidrolock_Modbus_Scanner.Properties
     // class via a tool like ResGen or Visual Studio.
     // To add or remove a member, edit your .ResX file then rerun ResGen
     // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "4.0.0.0")]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "17.0.0.0")]
     [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
     [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    internal class Resources
+    internal class Resources {
-    {
         
         private static global::System.Resources.ResourceManager resourceMan;
         
         private static global::System.Globalization.CultureInfo resourceCulture;
         
         [global::System.Diagnostics.CodeAnalysis.SuppressMessageAttribute("Microsoft.Performance", "CA1811:AvoidUncalledPrivateCode")]
-        internal Resources()
+        internal Resources() {
-        {
         }
         
         /// <summary>
         ///   Returns the cached ResourceManager instance used by this class.
         /// </summary>
         [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Resources.ResourceManager ResourceManager
+        internal static global::System.Resources.ResourceManager ResourceManager {
-        {
+            get {
-            get
+                if (object.ReferenceEquals(resourceMan, null)) {
-            {
+                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("Gidrolock_Modbus_Configurator.Properties.Resources", typeof(Resources).Assembly);
-                if ((resourceMan == null))
-                {
-                    global::System.Resources.ResourceManager temp = new global::System.Resources.ResourceManager("Gidrolock_Modbus_Scanner.Properties.Resources", typeof(Resources).Assembly);
                     resourceMan = temp;
                 }
                 return resourceMan;
@@ -56,14 +51,11 @@ namespace Gidrolock_Modbus_Scanner.Properties
         ///   resource lookups using this strongly typed resource class.
         /// </summary>
         [global::System.ComponentModel.EditorBrowsableAttribute(global::System.ComponentModel.EditorBrowsableState.Advanced)]
-        internal static global::System.Globalization.CultureInfo Culture
+        internal static global::System.Globalization.CultureInfo Culture {
-        {
+            get {
-            get
-            {
                 return resourceCulture;
             }
-            set
+            set {
-            {
                 resourceCulture = value;
             }
         }

Properties/Settings.Designer.cs

@@ -8,21 +8,17 @@
 // </auto-generated>
 //------------------------------------------------------------------------------
 
-namespace Gidrolock_Modbus_Scanner.Properties
+namespace Gidrolock_Modbus_Configurator.Properties {
-{
     
     
     [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "11.0.0.0")]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "17.11.0.0")]
-    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase
+    internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
-    {
         
         private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));
         
-        public static Settings Default
+        public static Settings Default {
-        {
+            get {
-            get
-            {
                 return defaultInstance;
             }
         }